Independent local-network guide

No passwords collected. No brand affiliation.

DEFAULT ROUTER IP / FIELD INDEX

10.0.0.1 & default
router IP addresses.

Search the brand on your router, modem, mesh system, or fiber gateway. The directory groups common factory addresses and local login names without pretending that one default works for every model.

30brands indexed
03device categories
0passwords requested
THE SHORT ANSWER

Label first. Live gateway second. Directory third.

  1. 01

    Read the router label. Look for Router IP, Web UI, Gateway, or Login URL.

  2. 02

    Check the live route. The Default Gateway reflects the network you are using now.

  3. 03

    Use this index. Match the brand and test only the addresses relevant to that device.

01 / SEARCH BY BRAND

Default router IP address directory

These are commonly documented starting points, not permanent assignments. Firmware, setup mode, internet providers, DHCP, and previous configuration can change the local address.

30 brands shown

Open local links only while connected to the router you manage.

Brand / type Common local IP addresses Local names / guide
02 / UNDERSTAND THE ADDRESS

Why the same IP appears under many brands

Private IP addresses are reusable. A TP-Link router in one home and a gateway from another brand somewhere else can both use 192.168.1.1 without conflicting because neither address is public.

01

192.168.1.1

Most widely reused home gateway

Seen across retail routers, fiber gateways, DSL equipment, and provider hardware.

Try local address ↗
02

192.168.0.1

Common consumer-router subnet

Frequently used by D-Link, TP-Link, Tenda, Arris, Motorola, and many other brands.

Try local address ↗
03

10.0.0.1

Private 10/8 admin address

Common on Xfinity gateways and selected NETGEAR, Cisco, Arris, Technicolor, and Intelbras devices.

Try local address ↗
04

192.168.100.1

Cable modem or ONT diagnostics

This may open a modem status page rather than the main Wi-Fi router.

Try local address ↗
05

192.168.1.254

Provider gateway address

Used by selected fiber, DSL, and ISP-managed gateways.

Try local address ↗
06

192.168.8.1

Mobile and travel router subnet

Often associated with Huawei mobile broadband and GL.iNet travel routers.

Try local address ↗
03 / WHEN A DEFAULT FAILS

Find the address your network uses now

Do this before a factory reset. The correct gateway is normally visible in the active network connection on the phone or computer already connected to the router.

WINDOWS

ipconfig

Open Command Prompt, run the command, and read Default Gateway under the active adapter.

macOS

Network → Details

Open the active Wi-Fi connection, choose TCP/IP, and read the Router value.

iPHONE / iPAD

Wi-Fi → ⓘ

Tap the connected network and find Router in the IPv4 Address section.

ANDROID

Wi-Fi details

Open the connected network, expand Advanced details, and look for Gateway.

04 / SAFE ADMIN ACCESS

Know what this directory does—and does not do

Clicking an IP opens a direct HTTP request from your browser to that local address. It does not pass through 100001admin.com. We cannot see whether the router responds or what you enter there.

01Connect locally

Use the router Wi-Fi or Ethernet, not cellular data.

02Confirm the address

Four numeric groups only; never 10.0.0.0.1.

03Keep credentials local

Enter them only on the router page or official app.

04Change one setting

Record the old value before applying a new one.

05 / QUICK CLARIFICATIONS

Default router IP FAQ

Short answers for the most common address, access, password, and reset questions.

01What is a default router IP address?

It is the private local address a router or gateway may use for its administration page when first configured. The owner, installer, firmware, or internet provider can change it, so the live Default Gateway reported by a connected device is more reliable than any directory.

02Which router IP address should I try first?

Start with the address printed on the router label or shown as Default Gateway on your connected device. 192.168.1.1, 192.168.0.1, and 10.0.0.1 are common, but guessing is less reliable than checking the current network route.

03Why does a listed default IP not open?

You may be connected to another router, guest Wi-Fi, mobile data, a VPN, or a changed subnet. The router may also use an app, a local hostname, or provider-managed interface. Confirm the current gateway and try HTTP if HTTPS fails.

04Is a router login IP a public website?

No. Private addresses such as 10.0.0.1 and 192.168.1.1 normally route only inside the local network. This guide links directly to the address; it does not proxy the connection or receive router credentials.

05Are default IP addresses the same as default passwords?

No. An IP address identifies the local device. A password proves authorization. Modern routers frequently create a unique password during setup or print device-specific credentials on a label. Do not use unrelated password lists.

06Should I reset the router if none of the addresses work?

Not until you have checked the live gateway, cables, Wi-Fi connection, mobile data, VPN, router label, official app, and model manual. A reset can erase Wi-Fi, internet, voice, VLAN, bridge, and provider settings.

NEED MODEL-SPECIFIC CONTEXT?

Continue with a
router brand guide.

Browse Router Brands